Wall panel "Thermo"

back-arrow Back
(Incl. VAT)
Description filter-plus
SKU
SA-41
118/59/32 x 10/8/6cm Panel size 118/59/32 x 10/8/6cm
4/7 mm Panel thickness 4/7 mm
18 planks; 1m2 Package contents 18 planks; 1m2
120x26x5 cm Package size 120x26x5 cm
3D wall covering made of thermowood
Sustainability filter-plus
Wood is the most useful and most sustainable material. It is known to be one of the most naturally renewable energy sources, which means it will have less of an impact on the environment compared to other materials.
Support filter-plus
For frequently asked questions check our FAQ page or contact us on sales@awl.lv
What’s in the box? filter-plus
One box contains 18 pieces of 118/59/32 x 10/8/6cm size panels, 1 of each size and thickness, in total that is 1 m2
Shipping filter-plus
Shipping costs will be calculated at checkout
Product information 3D wall covering made of thermowood

Wall panel "Thermo" is made of thermowood, which has been cut into two thicknesses to create a 3D effect. This timber is thermo-treated wood produced using completely natural methods—heat and steam. The thermal treatment improves the wood’s properties, opening it up to a wide range of applications. Made from premium quality sustainable pine and spruce, without any harmful chemicals.

Quick guide

Acclimatization and choice of glue

We recommend acclimatizing wood panels to the new environment for 1-2 days, keeping them unpacked. This will ensure that the panels get used to the climate of the new room. Use only water-free polymer-based flexible mounting adhesive to glue the panels to the wall. Do not use dispersion-based (water based) adhesives, as this can lead to deformation of the panels!

Wall preparation

Make sure that the surface on which you will install the panels is relatively flat. The surface must also be clean, dry and free of dust. The product is intended for use in rooms with relative humidity from 40% to 60%. The panels are made of natural wood, that is why use them in high humidity places is not recommended.

Fixing the panels to the wall

Use polymer-based mounting adhesive to glue the panels to the wall. Do not use dispersion-based (water based) adhesives, as this can lead to deformation of the panels When choosing an adhesive, follow the adhesive manufacturer’s instructions about the surface onto which you plan to glue the panels, as well as the required amount of adhesive. Apply the glue as instructed. Make sure that the glue is also applied to the corners of the panels. Make sure the glue is applied to the corners of the panels as well.

Laying of panels

You can arrange the panels on the wall in your own unique pattern (horizontally, vertically, diagonally, or in any pattern of your choice) or as shown in the diagram.  The decorative (facade) side of OZO model panels is structured, ribbed! Pay attention to it!

Reviews

Write Your Own Review
gallery-image-icon Upload images
loader
Loading...

check-circle You submitted your review for moderation.